STM32F401/ STMicroelectronics

---

For customers designing ST Microelectronics

We are pleased to introduce you to our crystal unit

Items to Confirm (designing of oscillation circuit)

Please note: to design oscillation circuit, you need to confirm the electronic characteristics as follows:

Oscillation allowance and Negative resistance (-R):
You need to confirm oscillation capability.
We recommend the condition: (-R) / ESR > 5
* -R: Negative resistance, ESR: Equivalent Series Resistance
Drive Level:
You need to confirm if oscillation is stable, and if the drive level is within the specification.
Load Capacitance:
Load capacitance affects frequency stability, oscillation allowance, negative resistance, and start-up time of oscillation.
In addition the load capacitance is determinative factor of crystal unit's load capacitance (CL value) directly.
* frequency stability: frequency deviation out of circuit conditions.

Selection Guidance for crystal unit

When Customer selects crystal unit, ｌload capacitance (CL value) is an important factor of the selection.
For instance, crystal with small CL(7.0 pF) makes larger oscillation allowance, smaller current consumption and worse frequency stability, like below table.
Oppositely, crystal with large CL(12.5 pF) makes smaller oscillation allowance, larger current consumption and better frequency stability.
Please select it in consideration of these characteristics.

StrongFirst Crystal Product Lineups

Product	Size [mm]	Applications	Images
S3215	3.2x1.5x0.8t	Portable equipment
S2012	2.05x1.2x0.6t
S1610	1.6x1.0x0.5t

Oscillation Circuit and Selection Guidance of Crystal Unit for STM32F401

Pin number of OSC32_IN/OSC32_OUT
For STM32F401xB/STM32F401xC

PKG	OSC32_IN	OSC32_OUT
UQFP48	3	4
WLCSP49	C7	C6
LQFP64	3	4
LQFP100	8	9
UFBGA100	D1	E1

32kHz Crystal Unit				Evaluation result *3			Vdd of STM32F4
Name	CL*1 [pF]	Part number	R1*6 [kΩ] Max.	External parts *2		|-R| *5 [kΩ]	[V]
				Cg[pF]	Cd[pF]
S3215	7.0	S3215-32.768K-7-20-E	50	7	7	270	3.3V
						270	2.4V
						300	1.8V
	6.0	S3215-32.768K-6-20-E	50	6	6	300	3.3V
						330	2.4V
						360	1.8V
S2012	5.0	S2012-32.768K-5-20-E	90	4	3	400	3.3V
						430	2.4V
						470	1.8V
S1610	5.0	S1610-32.768K-5-20-E	TBD	TBD	TBD	TBD	3.3V
						TBD	2.4V
						TBD	1.8V

Please use the digital calibration function of STM32F401 for RTC purpose.For the detail, please refer to the application note "AN3371" (Doc ID 018624) from ST Microelectronics.

 Notes:*

1. Load capacitance.

2. Above recommendations are based on actual evaluation results and intended to support users in picking the right components. And the results are only according to the sample set that received from our customers, so it is not including the dispersion trend of IC and the external parts.
As the actual board layout and choice of external components influences the best suitable crystal load capacitance, We do not assume any responsibility and grant warranty for above recommendations. Users design must be verified and decided by own and individual evaluation.

3. The evaluation board is the STM32F401Discovery Board (32F401CDISCOVERY).

4. Negative resistance. Our recommend value is five times or more R1.

5. Equivalent Series Resistance (ESR).

Precautions for designing of PCB Board

-Please lay out crystal unit, capacitor and resistor near STM32F401 as far as possible.
-The length of signal patterns in oscillation circuit should be as short as possible, and do not cross other signal lines.

For 32kHz Crystal unit

-Please lay out GND line pattern under crystal unit.
-In case of multi-layer PCB board, do not lay out other signal lines under crystal unit.

---